This is a 1.54 inch Electronic Shelf Label E Ink Panel color Epaper-display with 152x152 resolution, SPI interface, and the display is capable to display images with black, white and red content. Your image holds indefinitely without power – put up your image, then shut down the power. Once these epaper modules are updated they don't require any power and can actually be disconnected entirely and the content will remain on the display indefinitely. This color epaper-display GDEM0154Z91 is perfect for low power devices powered by solar or batteries.
We provide the E-Ink Adapter Board for you to connect the E-paper Display.
We could provide front light, touch screen and other accessories for you.
Relevant manual about this product on our official website (www.good-display.com), contact us please.
You can refer to the following link for the procedures and instructions of automatic e-paper display bitmap conversion: ImageToEpd. Also you could use our free e-paper software to prepare your bitmap image for this display, or make the picture on our bitmap conversion website: Image to Array
* This e-ink display module DOES NOT support partial updates.
● Versatile. Use in portrait or landscape format
● Bistable. (Will continue to display with no power source)
● I2C Signal Master Interface to read external temperature sensor
● Black, white and red. Compared with monochrome electronic paper display, it is more beautiful
● Development platform available STM32 / Arduino/ Raspberry Pi / ESP8266 / ESP32
1) Electronic Paper Display Tag 1.54 Inch SPI Epaper Small Color Eink, GDEM0154Z91 * 1pc
2) FPC Connector * 1pc
PART NUMBER | GDEM0154Z91 | ||
SIZE | 1.54 inch | TYPE | Dot Matrix |
IC | SSD1680 | CONNECTOR | 24 Pin FPC |
RESOLUTION | 152x152 | MAX GRAYSCALE | 2 |
OUTLINE SIZE(mm) | 31.8x37.32x1.0 | COLOR | Black, White, Red |
ACTIVE SIZE(mm) | 27.512x27.512 | INTERFACE | SPI |
PIXEL PITCH(mm) | 0.181x0.181 | FULL REFRESH(s) | 14 |
OPERATING TEMP. | 0℃~40℃ | POWER CONSUMPTION OF THE REFRESH(mW) | 9.6 |
STORAGE TEMP. | -25℃~60℃ | STANDBY POWER CONSUMPTION (mW) | 0.0165 |
Part Number |
Color |
Resolution |
Features |
Refresh Time |
BW |
200x200 |
SSD1681, Partial Refresh, With Frontlight |
2s |
|
BW |
152x152 |
JD79653, Fast Refresh, Partial Refresh |
0.82s |
|
BW |
152x152 |
UC8151D, DES, High contrast |
3s |
|
BW |
152x152 |
UC8151C, Fast Refresh, Partial Refresh, With Frontlight |
0.82s |
|
BW |
152x152 |
UC8151D, Fast Refresh, Partial Refresh |
0.82s |
|
BWR |
200x200 |
SSD1681, Colorful(Red) |
15s |
● DESPI-C02 (E-ink Display HAT)
● DESPI-L(C02) (STM32 Platform/Universal)
● DEArduino-L(C02) (Arduino Platform)
● ESP8266-L(C02) (WiFi)
● ESP32-L(C02) (WiFi / Bluetooth)
● DESPI-PICO (Rasberry Pi Epaper HAT)
Thank you for your interest in our product. If you need any further assistance or have any other questions, please feel free to contact us. We sincerely invite you to send your inquiries to our email at [buyepaper@good-display.com].