This is a E-ink Display, 2.13 inch, supports 0.4s partial refresh, with 250x122 resolution, SPI interface, 4 Gray Level and the display is capable to display images with black and white content. Your image holds indefinitely without power – put up your image, then shut down the power. Once these e-ink modules are updated they don't require any power and can actually be disconnected entirely and the content will remain on the display indefinitely. This e-ink display GDEQ0213B74 is perfect for low power devices powered by solar or batteries.
We provide the E-Ink Adapter Board for you to connect the E-paper Display.
We could provide front light, touch screen and other accessories for you.
Relevant manual about this product on Library or you could go to our official website (www.good-display.com), contact us please.
You can refer to the following link for the procedures and instructions of automatic e-paper display bitmap conversion: ImageToEpd. Also you could use our free e-paper software to prepare your bitmap image for this display, or make the picture on our bitmap conversion website: Image to Array
1) E-ink Display 2.13 Epaper Partial Refresh SPI HDMI 250x122 EPD Screen * 1pc, GDEQ0213B74 * 1pc
2) FPC Connector * 1pc
PART NUMBER |
GDEQ0213B74 |
||
TYPE |
Dot Matrix |
CONNECTOR | 24 Pin FPC |
SIZE |
2.13 inch |
MAX GRAYSCALE | 4 |
IC |
SSD1680Z8 |
COLOR | Black,White |
RESOLUTION |
250x122 |
INTERFACE | SPI |
OUTLINE SIZE(mm) |
59.2x29.2x0.926 |
FULL REFRESH(s) | 3 |
ACTIVE SIZE(mm) |
48.55x23.7046 |
PARTIAL REFRESH TIME(s) | 0.4 |
PIXEL PITCH(mm) |
0.1943x0.1942 |
POWER CONSUMPTION OF THE REFRESH(mW) | 9 |
OPERATING TEMP. |
0℃~50℃ |
STANDBY POWER CONSUMPTION (mW) | 0.003 |
STORAGE TEMP. |
-25℃~70℃ |
● Support 4 Grayscale
● Wide Viewing. Near 180°.
● Black and white monochrome is easy to read
● Versatile. Use in portrait or landscape format
● It supports partial refresh, the refresh rate is 0.4s/frame
● Bistable. (Will continue to display with no power source)
● I2C Signal Master Interface to read external temperature sensor
● Low power consumption. Once these e-paper modules are updated they don't require any power
● Development platform available STM32 / Arduino / ESP8266 / ESP32
● DESPI-C02 (E-ink Display HAT)
● DESPI-L(C02) (STM32 Platform/Universal)
● DEArduino-L(C02) (Arduino Platform)
● GDEQ0213B74 Specification
● Picture Production and Bitmap Convert for GDEQ0213B74
● GDEQ0213B74 STM32 Sample Code
● GDEQ0213B74 Arduino Sample Code
● GDEQ0213B74 ESP8266 Sample Code
● GDEQ0213B74 ESP32 Sample Code
Thank you for your interest in our product. If you need any further assistance or have any other questions, please feel free to contact us. We sincerely invite you to send your inquiries to our email at [buyepaper@good-display.com].