This is a 2.13 inch e-paper eink Display with backlit, 250x122 resolution, SPI interface, supports 1.5s fast refresh, 3s full refresh, 0.4s partial refresh, and the display is capable to display images with black and white content. Your image holds indefinitely without power – put up your image, then shut down the power. Once these e-paper modules are updated they don't require any power and can actually be disconnected entirely and the content will remain on the display indefinitely. This e-paper display GDEY0213B74-FL01 is perfect for low power devices powered by solar or batteries, especially in dark environment.
Relevant manual about this product on Library or you could go to our official website (www.good-display.com), contact us please.
You can refer to the following link for the procedures and instructions of automatic e-paper display bitmap conversion: ImageToEpd. Also you could use our free e-paper software to prepare your bitmap image for this display, or make the picture on our bitmap conversion website: Image to Array
1) 2.13 inch E-Paper Eink Display SSD1680Z Backlit Electronic Paper Screen * 1pc
2) FPC Connector for EPD * 1pc
3) FPC Connector for Backlit * 1pc
● Support 4 Grayscale
● With 3 LED Frontlight.
● Support 1.5s Fast Refresh
● Black and white monochrome is easy to read
● Versatile. Use in portrait or landscape format
● It supports partial refresh, the refresh rate is 0.4s/frame
● Bistable. (Will continue to display with no power source)
● I2C Signal Master Interface to read external temperature sensor
● Development platform available STM32 / Arduino/ Raspberry Pi / ESP8266 / ESP32
PART NUMBER |
GDEY0213B74-FL01 |
||
TYPE |
Dot Matrix |
CONNECTOR | 24 Pin FPC |
SIZE |
2.13 inch |
MAX GRAYSCALE | 4 |
IC |
SSD1680Z |
COLOR | Black,White |
RESOLUTION |
250x122 |
INTERFACE | SPI |
OUTLINE SIZE(mm) |
59.2x29.2x1.4 |
FULL REFRESH(s) | 3 |
ACTIVE SIZE(mm) |
48.55x23.7046 |
FAST REFRESH(s) | 1.5 |
PIXEL PITCH(mm) |
0.1943x0.1942 |
PARTIAL REFRESH TIME(s) | 0.42 |
OPERATING TEMP. |
0℃~50℃ |
EPD POWER CONSUMPTION OF THE REFRESH(mW) | 10.5 |
STORAGE TEMP. |
-25℃~70℃ |
EPD STANDBY POWER CONSUMPTION (mW) | 0.003 |
VOLTAGE OF BACKLIT |
≤9V |
QUANTITY OF LED |
3pcs LEDs |
CURRENT OF BACKLIT |
≤15mA |