Any questions, just feel free to contact me, my email is: info@good-display.com
☆ INTRODUCTION
This is a 2.9 inch tri-color e-ink display with 296x128 resolution, SPI interface, and the eink epaper screen is capable to display images with black, white and red content. Your image holds indefinitely without power – put up your image, then shut down the power. Once these e-paper modules are updated they don't require any power and can actually be disconnected entirely and the content will remain on the display indefinitely. This e-paper display GDEW029Z13 is perfect for low power devices powered by solar or batteries. It (12s/frame) refreshes faster than GDEH029Z13 (15s/frame).
We could provide front light, touch screen and other accessories for you.
We provide the E-Ink Adapter Board for you to connect the E-paper Display.
Relevant manual about this product on Library Page, or you could go to our official website (www.good-display.com) to get more information.
You can refer to the following link for the procedures and instructions of automatic e-paper display bitmap conversion: ImageToEpd. Also you could use our free e-paper software to prepare your bitmap image for this display, or make the picture on our bitmap conversion website: Image to Array
☆ FEATURE
● Wide viewng angle. Near 180°.
● Versatile. Use in portrait or landscape format.
● Bistable. (Will continue to display with no power source)
● I2C Signal Master Interface to read external temperature sensor
● Black, white and red. Compared with monochrome electronic paper display, it is more beautiful
● Low power consumption. Once these e-paper modules are updated they don't require any power
● Development platform available STM32 / Arduino/ Raspberry Pi / ESP8266 / ESP32
☆ THE ABOVE PRICE INCLUDE
1) 2.9 inch E-Paper UC8151D Tri-color E-ink Panel SPI interface * 1pc
2) FPC Connector * 1pc
☆ MAIN PARAMETERS
|
PART NUMBER
|
GDEW029Z13
|
|
|
SIZE
|
2.9 inch
|
STORAGE TEMP. |
-25℃~60℃ |
|
TYPE
|
Dot Matrix
|
CONNECTOR |
24 Pin FPC |
|
IC
|
UC8151D
|
MAX GRAYSCALE |
2 |
|
RESOLUTION
|
296x128
|
COLOR |
Black, White, Red |
|
OUTLINE SIZE(mm)
|
79x36.7x1.18
|
INTERFACE |
SPI |
|
ACTIVE SIZE(mm)
|
66.9x29.06
|
FULL REFRESH(s) |
12 |
|
PIXEL PITCH(mm)
|
0.227x0.226
|
POWER CONSUMPTION OF THE REFRESH(mW) |
26.4 |
|
OPERATING TEMP.
|
0℃~40℃
|
STANDBY POWER CONSUMPTION (mW) |
0.0165 |
☆ OTHER PRODUCTS
☆ MATCHED DEVELOPMENT KIT
● DESPI-C02 (E-ink Display HAT)
● DESPI-L(C02) (STM32 Platform/Universal)
● DEArduino-L(C02) (Arduino Platform)
● ESP8266-L(C02) (WiFi)
● ESP32-L(C02) (WiFi / Bluetooth)
● DESPI-C03 (Rasberry Pi Epaper HAT)
☆ ABOUT US
Please feel free to contact us for any questions, on trademanager, or send message to me. It's our pleasure to serve you! We appreciate your business!!
My email is: info@good-display.com
USD
