Any questions, just feel free to contact me, my email is: clara@good-display.com
This is an E ink E paper display panel, 2.6 inch, 296*152 resolution, 24 pins FPC connection, optional FPC connector,
communicating via SPI interface, with embedded controller(COG package) and on-chip stored waveform, supports black,white and red.
In view of so many advantages: ultra low power consumption, near 180 degree view angle, readable under sunlight,· Three colors, black, white and red
· 296x152 resolution
· Comes with helpful development resources and manual (STM32 platform )
· Development platform available STM32 / Arduino / Raspberry Pi
1. 2.6 inch e-paper display GDEW026Z39
2. Matched FPC Connector*1pc
Part Number |
GDEW026Z39 |
Type |
Dot Matrix |
Resolution |
296*152 |
Outline Size(mm) |
71.82*36.3*1.18 |
Active Size(mm) |
60.09*30.7 |
Pixel Pitch(mm) |
0.203*0.202 |
Operating Temp. |
0~40C |
Storage Temp. |
-25~60C |
Connector |
24 Pin FPC, Pitch:0.5mm |
Color |
Black, White and Red |
Interface |
SPI |
Standby power consumption Pc(mW) | 0.0165 |
Power consumption of the refresh(mW) | 26.4 |
Time of refresh(s) | 16 |
Part Number |
Color |
Resolution |
Feature |
Refresh time |
GDEW026T0 | Black, White |
296x152 |
Partial refresh, 4 Grayscale | 3s |
GDEW026Z39 | Black,White,Red |
296x152 |
Three colors | 16s |
http://www.e-paper-display.com/products_detail/productId=398.html